!
USER MANUAL – Release 1.2 of 01/01/2010
Page 74 of 191
Version: 02/03/2010
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
In this screen it is also possible to verify (but not modify) whether the energy saving mode and dynamic set
are active;
During working of one of the two modes, the real set-point is also displayed. If the energy saving or the
dynamic set is active, the Real Cooling or Heating represent the set-point value including the energy saving
delta or of the dynamic set, while the set-point represents the real set when the energy saving or the
dynamic set are not active.
Press the
ESC
key several times to go back to the main screen.
16.4 PROBES KEY
To see the variables of the circuits from the main screen, press the
PROBES
key;
By pressing the
key, all of the relevant variables of the circuits can be seen.