Dinolift DINO XT II 160, Руководство по эксплуатации

Страница: 65 / 73

65
8.1. INSTRUCTIONS FOR DAILY MAINTENANCE AND INSPECTIONS
8.1.1. Check the condition of chassis, the boom and the work platform
Check visually the condition of the access routes, the work platform, the platform gate and
the handrails.
Check visually the condition of the boom and the frame structures.
8.1.2. Check the tyres and tyre pressure
Check visually that the tyres are duly inflated, and do not show any damage.
8.1.3. Check the lights
Check the condition of all the warning and signal lights as well as the road traffic lights of the
trailer.
8.1.4. Check the hydraulic oil level
Check the hydraulic oil level with the platform in the transport position.
If necessary, top up hydraulic oil in accordance with the scale on the tank.
The hydraulic oil tank is located under a cover on the right-hand side of the lift.
160XT
180XT
210XT
At the same time, check in the level eye of the oil tank that the oil is looking clean and normal
(no excess foam etc.).
8.1.5. Check the hydraulic hoses, pipes and connectors
Check visually the hydraulic hoses, pipes and connections.
Make sure that there are no visible oil leaks.
Replace any externally damaged hoses and clashed pipes or fittings.