Dinolift DINO XT II 160, Руководство по эксплуатации

Страница: 53 / 73

53
5.3.5. Lifting the device
The device can be lifted using the lugs shown in the picture. The lifting lugs are located
symmetrically on both sides of the lift.
During lifting the aerial work platform must be in the transport position. Remove all loose
material from the top of the frame structures and the work platform before starting the lifting.
Use for lifting a suitable crane with sufficient capacity and relevant accessories. Check the
weight of the lift in the technical specifications.
Be careful not to damage the unit during the lifting operation .
min. 2000 mm
160XT II 190 mm 160XTB II 200 mm
180XT II 190 mm 180XTB II 180 mm
210XT II 320 mm 210XTB II 300 mm
5.4. LONG-TERM STORAGE
Clean the machine carefully, lubricate it and apply protective grease to it before putting it into
storage for a longer period of time (see point “Lubrication plan”). Repeat the cleaning and
lubrication procedures when you resume the operation.
If you leave the lift standing for a longer period of time, for example over the winter, we
recommend propping it up to release any load from the wheels.
DANGER
WARNING
CAUTION
NOTICE
The periodic inspections must be executed following the steps described in the instructions.