background image

49

5.3.2.  Using the driving device

The hydraulic driving device is intended for moving the lift within the work area if the towing 

vehicle cannot be used. 

During transfer in rough terrain, always try to position yourself higher than the 

machine.

1.  Turn the selector switch Q1 to the position "chassis control 

centre".

Piirustuksen numero

VILAKONE OY

Tulostus pvm.

Revisio

Kpl/kone

Ohjetarra, joystick

1

41603606

2.  Make sure that the platform is in the transport position and the outriggers have been 

lifted to the upper position. 

3.  Make sure that the mains cable is long enough to cover 

the whole travel distance – or that the cable has been 

disconnected.

4.  Switch the driving device to the drive position.
5.  Release the handbrake.

6.  Turn the speed selector to activate the movement.  

The switch must be kept turned throughout the operation.  

The driving device operates at a constant speed.

54.1821

V

7.  Select the driving direction via the pushbuttons.

8.  Steer the lift via the pushbuttons during driving.

54.1821

V

 

DANGER

WARNING

CAUTION

NOTICE

Do not drive the jockey wheel into obstacles or potholes. 

If one of the wheels bumps 

into an obstacle, the lift may turn abruptly.

After the driving:

•  Apply the handbrake.

•  Disconnect the driving device from the tyre.

Содержание DINO XT II 160










































































Отзывы: