Dinolift DINO XT II 160, Руководство по эксплуатации

Страница: 60 / 73

60
Maintenance instructions • DINO 160XT II • 180XT II • 210XT II
7. MAINTENANCE SCHEDULE
DANGER
WARNING
CAUTION
NOTICE
In addition to the daily maintenance routines according to the maintenance schedule, every
operator is obliged to perform a site-specific worksite inspection.
T = Check (general/visual checking of condition).
P = Thorough Inspection. To be performed following the procedure, described in the separate
maintenance instructions.
V = Lubricate
S = Carry out replacements and repairs in accordance with this point
Maint. Schedule Person responsible Reference
A
Daily Operator
Operating
instructions
B
1 month / 100
hours*
Competent person who is familiar with the lift
Maintenance
instructions
C
6 months / 400
hours*
Competent person who is familiar with the lift
Maintenance
instructions
D
Annually / 800
hours*
Skilled technician who is well familiar with the
structure and operation of the lift
Maintenance
instructions
E
As needed
Skilled technician who is well familiar with the
structure and operation of the lift
Maintenance
instructions
* Service must be performed every indicated month or operating hour interval, whichever
comes first.
Always lubricate the lift and apply a protective grease film immediately after the washing.
The lift must be subjected to an extraordinary inspection always after an exceptional event.
An event is exceptional, for example, if the lift has been damaged so severely, that its
strength or operational safety may have been endangered. Consult the maintenance manual
for more detailed instructions.
DANGER
WARNING
CAUTION
NOTICE
If the lift is equipped with a petrol-driven or a diesel power pack, then in addition to the
normal maintenance routines must also be carried out the service measures in accordance
with the power pack's manual.
DANGER
WARNING
CAUTION
NOTICE
Under demanding conditions where moist, corrosive substances or corrosive climate may
speed up the deterioration of the structures and induce malfunctions, the maintenance
intervals must be shortened, or the influence of corrosion and malfunctions must be
reduced by using appropriate protective agents.