83
28.3.4 Thorough inspection of the steel structures
Check the attachment points of the hydraulic cylinders.
Check the condition of the lifting cylinder bearings and pins and the locking of the
pins.
Check the condition of the articulated arm cylinder bearings and pins and the locking
of the pins.
Check the condition of the boom cylinder bearings and pins and the locking of the
pins.
Check the condition of the jib cylinder bearings and pins and the locking of the pins.
Check the condition of the boom cylinder's gas springs.
Check the condition of the master and slave cylinder bearings and pins and the
locking of the pins.
Inspecting the joints of the boom, the articulated arms and the jib arms
Check the bearing and the pin of the boom joint and the locking of the pin.
Check the condition of the joint pins and bearings of the articulated arms and the
locking of the pins.
Check the condition of the joint pins and bearings of the jib arms and the locking of
the pins.
Inspecting the boom
Extend the telescope and check that there are no permanent deformations, dents or
traces of substantial wear in the boom.
Also check that the welded seams neither are worn nor show cracks or breaches.
Check the condition of the boom brackets for cracks or breaches.
Check the condition of the platform brackets.
Check the locking of the platform pin.
Check the condition and attachment of the flyer-chain, the locking of the pins and the
tightness of the spring.
Check the condition of the cable chain and its brackets as well as the tightness of the
screw connections.
Check the play and attachment of the glide pads for the boom.
Inspecting the platform
General
condition
Check that the platform does not show signs of deformations, substantial wear or
buckles.
Check that the handrails, the steps, the gate and the attachment of the gate are in
order.
Check that the closing mechanism of the gate works properly, and that the gate
locks up.
Содержание DINO 185XTS
