Dino lift DINO 185XTS, Руководство по эксплуатации

Страница: 70 / 121

70
26.2.8 Measuring the pressure

Boom movements
o
Connect the pressure gauge to the measuring connector.

The oil must be at the operating temperature (40 - 60 °C) during measuring of the
pressure.

if you have to readjust the pressure, secure the new setting with a seal.

Check the setting of the main relief valve, and the maximum pressure of the different
boom movements in accordance with the adjacent table by driving the cylinder for the
respective movement against its external position in the direction to be measured.
Measuring object
(measuring point)
Max. Pressure Movement to be measured
Main pressure, max.
pressure (1)
210 bar Boom extensions in
Turning device
(3A/3B)
80 bar
Turning device counter-
clockwise/clockwise
Boom extensions out
(2)
140 bar Boom extensions out / in
Jib arms up/down +
platform turn to the
right/left (4A/4B)
190 / 190 bar Jib arms up / down