
71
26.2.9 Check the operating controls on the work platform (UCB) and in the lower
control centre (LCB)
check the overall condition of the electric appliances inside the box and spray with
moisture repellent, if necessary
check the cables and the tightness of the cable clamps
test the sound signal (S10), emergency stop (S4,S1), emergency descent (S11,S14)
test all the operating controls and all the movements
pay attention to the condition of the gaskets
26.2.10
Warning stickers and instructions
Make sure all warning stickers and adhesive tapes are in place and legible; replace if
necessary.
Check that these operating and service instructions as well as the inspection protocols
are on the work platform, in the compartment reserved for them
26.2.11
Deutz (D 2011 L03 i) Diesel power unit
NOTE
Check daily the engine oil level, and that the cooler element is clean.
As necessary, clean the cooler by blowing compressed air over it.
Beware of damaging the cooler.
1. After every 1000 h or at least once a year (refer to the operating instructions
for the engine that are included in the delivery for more detailed information)
Change the engine oil and the oil filter every 1000 hours or once a year)
o
Mobil Delvac MX extra 10W-40
(API CI-4/CH-4/CG-4/CF/SL/SJ)
or equivalent
o
filling capacity with/without air filter: 5.5/6 l
2. After every 1000 h (refer to the operating instructions for the engine that are
included in the delivery for more detailed information)
Check the glow plug, replace as required
Check the electric conductors and connections (main fuse, battery cables and earthing)
Check the V-belt, replace as required
Check the bolts of the engine brackets
Check the hoses and the hose clamps
Check and adjust the play of the valves
Replace the fuel filter cartridge
Clean the water trap/pre-filter for fuel and replace the filter cartridge, as necessary
Replace the air filter
3.
After every 6000 h or at least after 5 year
s (refer to the operating instructions for
the engine that are included in the delivery for more detailed information)
Replace the timing belt
Содержание DINO 185XTS
