EK–SMRAA–IG. A01
vii
About This Guide
This section identifies the audience of this guide and describes the contents (chapter by chapter) and structure.
In addition, this section includes a list of associated documents and the conventions used in this guide.
This guide provides the following:
•
Description of how to unpack and assemble the RAID Array 310 Subsystem
•
How to install the Adaptec Host Adapter board into your Intel-based system.
•
Installing and using the RAID Array 310 Manager for Windows NT.
•
Configuring the RAID Array using the RAID Array 310 Manager.
Audience
This guide is intended for administrators and system integrators of StorageWorks RAID Array
310 Subsystems. Installing the StorageWorks RAID Array 310 Subsystem requires a general
understanding of RAID concepts, Windows NT, and product installation procedures
Document Structure
This guide contains the following chapters:
Chapter 1: Unpacking and Setting Up Your RAID Array 310 Subsystem Components
This chapter describes how to unpack and place the Deskside RAID Subsystem.
Chapter 2: Adaptec Host Adapter Installation
This chapter describes the steps required to install the Adaptec host adapter in your Intel-based
system.
Chapter 3: Installing and Using the RAID Array 310 Manager for Windows NT
This chapter describes how to install and use of the RAID Array 310 Manager for Windows
NT. The chapter also describes how to create your initial configuration.
Chapter 4: Completing your Configuration Setup under Windows NT
This chapter describes how to use Disk Administrator in Windows NT to complete the instal-
lation.
Appendix A: Configuration Record
This appendix contains blank forms that may be used to provide a record of your system con-
figuration.
