Getting Started – RAID Array 310 for Windows NT – Intel
1–2
EK–SMRAA–IG. A01
Figure 1–1 Minimum Installation Clearance Measurements
1.3
Unpacking the RAID Array 310
The shipping containers provide maximum protection for the subsystem and all components.
We recommend that you unpack the subsystem in the installation area.
NOTE
Before unpacking the equipment, inspect the shipping carton for
signs of external damage. Report any damage to the local carrier
and to your sales representative.
Refer to Figure 1–2 and complete the following procedure to unpack the subsystem:
1. Orient the shipping container as shown.
2. Open the container and remove the subsystem and packing material.
3. Remove the top foam blocks.
4. Remove the door.
5. Remove the subsystem.
6. Replace all packing material in the shipping container and store for future use.
