manualshive.com logo in svg

Digital Equipment HSZ40, Справочное руководство

Поделиться
Скачать
Digital Equipment HSZ40 Скачать руководство пользователя страница 17

ADD MIRRORSET

2–5

HSZ40 Array Controller

CLI Reference Manual

ADD MIRRORSET

Adds a mirrorset to the controller configuration and names the mirrorset. The number of
members is set to the number of devices specified in the command.

Format

ADD MIRRORSET 

mirrorset-name disk-name1 [disk-nameN]

Parameters

mirrorset-name
Specifies a name for the mirrorset. You use this name with the 

ADD UNIT 

command to

identify the mirrorset as a host-addressable unit.

The name must start with a letter (A–Z) and can then consist of up to eight more
characters made up of letters A-Z, numbers 0-9, periods (.), dashes (-), or underscores (_),
for a total of nine characters.

disk-name1 disk-nameN
The names of the disk drives that make up the mirrorset. A mirrorset contains 1 to 6 disk
drives.

Switches

COPY=NORMAL (Default)
COPY=FAST

__________________________ Note _____________________________

A normal mirrorset member is one whose entire contents are the same as all
other normal members.

____________________________________________________________

The 

COPY 

switch allows you to set the speed at which the controller copies data from

normal mirrorset members to new members.

Select 

NORMAL 

to prioritize other controller operations over the copy operation. The

controller uses relatively few resources to perform the copy, and there is little impact on
performance.

Select 

FAST 

when the copy operation must take precedence over other controller

operations. The controller uses more resources and the copy takes less time, but overall
controller performance is reduced during the copy.

Содержание HSZ40























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды