manualshive.com logo in svg

Digital Equipment HSZ40, Справочное руководство

Поделиться
Скачать
Digital Equipment HSZ40 Скачать руководство пользователя страница 15

ADD DISK

2–3

HSZ40 Array Controller

CLI Reference Manual

ADD DISK

Adds a disk drive to the controller configuration and names the drive.

Format

ADD DISK 

disk-name SCSI-location

Parameters

disk-name
Specifies a name for the disk drive. You use this name when adding the disk drive to a
storageset or with the 

ADD UNIT 

command to create a single-disk host-addressable unit.

The name must start with a letter (A–Z) and can then consist of up to eight more
characters made up of letters A-Z, numbers 0-9, periods (.), dashes (-), or underscores (_),
for a total of nine characters.

SCSI-location
The SCSI-location parameter assigns a PTL address to the disk drive. See page 1–5,
Specifying the Device PTL, for an explanation of the PTL numbering system.

Switches

TRANSPORTABLE
NOTRANSPORTABLE (Default)
Specify the 

TRANSPORTABLE 

switch for any disk drive that you want to move to and from

StorageWorks environments with the data intact.

__________________________ Note _____________________________

Use the 

TRANSPORTABLE 

switch only for disk drives that must be moved to

StorageWorks environments with data intact.

____________________________________________________________

A 

TRANSPORTABLE 

disk drive does not contain any special information space and can be

moved to a non-StorageWorks environment with its data intact. You cannot use a

TRANSPORTABLE 

disk drive in any type of storageset, such as a stripeset or RAIDset.

Specify 

NOTRANSPORTABLE 

for all disk drives that will be used in RAIDsets, stripesets, and

mirrorsets. Also use the 

NOTRANSPORTABLE 

switch for all single-disk units that will be

used exclusively in a StorageWorks or HSC™ controller.

The controller makes a small portion of nontransportable

 

disk drives inaccessible to the

host and uses the space to store information (metadata) that improves data reliability, error
detection, and recovery. Because of this metadata, only StorageWorks controllers can
retrieve user data from nontransportable disk drives.

Содержание HSZ40























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды