manualshive.com logo in svg

Digital Equipment HSZ40, Справочное руководство

Поделиться
Скачать
Digital Equipment HSZ40 Скачать руководство пользователя страница 100

2–88

UNMIRROR

UNMIRROR

Converts a one-member mirrorset back to a single device and deletes the  mirrorset from
the list of known mirrorsets. You can use this command on mirrorsets that are already
members of higher level containers (stripesets or units).

The 

UNMIRROR 

command is not valid for devices that have a capacity greater than the

capacity of the mirrorset. If a mirrorset is comprised of devices of different capacities, the
mirrorset capacity is limited to the size of the smallest member; larger members will have
unused capacity. If a member with unused capacity is the last remaining member of a
mirrorset, you cannot use the 

UNMIRROR 

command to change the device back to a single-

disk unit, because that change would cause a change in reported disk capacity, possibly
confusing the operating system.

Format

UNMIRROR 

disk-name

Parameter

disk-name
The disk-name parameter specifies the name of the mirrorset member to be removed from
the mirrorset.

Examples

To convert DISK130 back to a single device:

CLI> UNMIRROR DISK130

See also

ADD MIRRORSET
MIRROR
REDUCE
RUN CLONE
SET mirrorset-name

Содержание HSZ40























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды