Digital Equipment DLE49-MA, Руководство пользователя

Страница: 91 / 216

SNMP Traps Screen
DLE49-MA User’s Guide 5-27
To establish community names, proceed as follows:
1. Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
2. Enter the password in the field (maximum 31 characters).
3. Press ENTER.
4. Repeat steps 1 through 3 to modify the other community names.
5. Use the arrow keys to highlight SAVE at the bottom of the screen and
press ENTER. The message “SAVED OK” displays. The community
names are saved to memory and their access modes implemented.
5.10 SNMP TRAPS SCREEN
Since the DLM6C-AA is an SNMP compliant device, it can send
messages to multiple Network Management Stations to alert users of
status changes. The SNMP Traps screen is shown in
Figure 5-10 .
To access the SNMP Traps screen from the Chassis Menu screen, use the
arrow keys to highlight the SNMP TRAPS menu item and press ENTER.
The Chassis SNMP Traps screen displays.
Any community name assigned in the SNMP Community
Names screen is a password to its corresponding level of
access to Local Management. The community name assigned
Super-User access is the only one that gives the user complete
access to Local Management.
All passwords assigned in the DLM6C-AA SNMP Community
Names screen allow access to both the DLM6C-AA Local
Management screens, and the Local Management screens of
the interface modules that are installed in the chassis. To
configure the interface module to disallow access to the
DLM6C-AA Local Management screens refer to
Section 6.6 .