Digital Equipment DLE49-MA, Руководство пользователя

Страница: 175 / 216

Transmit Queues Configuration Screen
DLE49-MA User’s Guide 6-69
The weights selected must equal 100% or the values cannot be saved.
Default weight distribution is 25% per transmission queue. Selectable
percent weight values per priority transmit queue Q0 through Q3 are as
follows: 00, 06, 12, 19, 25, 31, 38, 44, 50, 56, 62, 69, 75, 81, 88, 94, 100.
To set the weight per priority, refer to Section 6.23.1.
Port (Selectable)
Used to step to the port to be configured. As each port is stepped to, the
port type (e.g., Ethernet Front panel) displays to the right of the selected
port number. To display the current weight settings for the selected port,
press ENTER.
Number of Queues (Read-Only)
Indicates the number of queues.
SET ALL PORTS (Command)
Used to set all available ports to the current screen settings.
6.23.1 Setting the Current Queueing Mode
To set the current queueing mode for a particular port, proceed as follows:
1. Use the arrow keys to highlight the Port field.
2. Press the SPACE bar to step to the appropriate port number. The port
type displays to the right of the Port number field.
3. Use the arrow keys to highlight the Current Queueing Mode field.
4. To select the Current Queueing Mode for the port selected in step 1,
press the SPACE bar to toggle to either STRICT 802.1p or
WEIGHTED. The default is STRICT 802.1p.
If STRICT 802.1p is selected, the frames will be transmitted out the
select port according to the frame transmit priority queues set in the
Advanced Priority Configuration screen. The weight priority transmit
To display the current port settings, press ENTER after
selecting the port number.