Digital Equipment DLE49-MA, Руководство пользователя

Страница: 154 / 216

Chapter 6: Local Management: Module Navigation
6-48 DLE49-MA User’s Guide
11. Use the arrow keys to highlight SAVE at the bottom of the screen.
Press ENTER. The message “SAVED OK” displays. This saves the
new settings and updates the Source Port and Destination Port
read-only fields.
6.16 VLAN REDIRECT CONFIGURATION SCREEN
The VLAN Redirect Configuration screen, Figure 6-18 , enables the user
to select a source VLAN ID and a destination port. For example,
VLAN ID 1 can be set as the source VLAN ID with port 2 as the
destination port. Traffic from VLAN 1 is then automatically redirected to
port 2 according to the Frame Format setting for that source VLAN. The
Frame Format setting determines the format in which the frames received
belonging to the source VLAN are redirected to the destination port. The
frames can be forwarded in the frame format as received, tagged, or
untagged.
The VLAN redirect function is very useful for troubleshooting purposes,
as it allows traffic associated with a particular VLAN to be sent to a
particular port where, with the use of an analyzer or RMON probe, all
current traffic from the source VLAN can be examined.
If more than 1 port is being redirected, repeat steps 1 through
10 for each additional setting. Then go to step 11 to save all the
new settings at once.
If an entry is to be changed, delete the entry, save the screen,
then recreate the entry with its new settings.
Any combination, up to 128, of port redirect instances
(configured on the Port Redirect Configuration screen) and/or
VLAN redirect instances (configured on the VLAN Redirect
Configuration screen) can be configured.
If the module is set to STAND ALONE mode (set in the General
Configuration screen), the chassis version of the VLAN
Redirect Configuration screen, described in
Section 5.14
displays. This allows for remapping to other modules in the
chassis (remote remapping). Note that it is up to the user to
select the correct numbers of the available modules and ports
for redirect purposes.