Digital Equipment DLE49-MA, Руководство пользователя

Страница: 172 / 216

Chapter 6: Local Management: Module Navigation
6-66 DLE49-MA User’s Guide
4. Press the SPACE bar to step to the appropriate value, 0 through 7. The
0 selection is the lowest level TX priority value.
5. If more than one TX priority is to be changed, repeat steps 3 and 4 until
all the appropriate TX priority settings are changed.
6. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
7. Press ENTER. The message “SAVED OK” displays and the setting is
saved.
6.22.3 Setting the Default Priority
To reset the default priority, proceed as follows:
1. Use the arrow keys to highlight the Port command field at the bottom
of the screen.
2. Enter the number of the port to which the TX queue setting is being
applied.
3. Use the arrow keys to highlight the Default Priority field.
4. Press the SPACE bar to step to the appropriate value, 0 through 7. The
0 selection is the lowest level priority.
5. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
Press ENTER. The message “SAVED OK” displays and the setting is
saved. This new setting will be reflected in the Port Priority Configuration
screen the next time it is displayed.
6.23 TRANSMIT QUEUES CONFIGURATION SCREEN
The Transmit Queues Configuration screen, Figure 6-25 , is used to set
each Port individually, or all ports simultaneously, to either transmit
frames according to the priority transmit queues set in the Advanced
Priority Configuration screen, or transmit frames according to a priority
based on a percentage of the port transmission capacity allocated for each
transmit queue.