Digital Equipment DLE49-MA, Руководство пользователя

Страница: 130 / 216

Chapter 6: Local Management: Module Navigation
6-24 DLE49-MA User’s Guide
super-user This community name permits read-write
access to the DLE49-MA
MIB objects and
allows the user to change all modifiable
parameters including community names, IP
addresses, traps, and SNMP objects.
6.6.1 Establishing Community Names
The password used to access Local Management at the Password Screen
must have Super-User access in order to view and edit the SNMP
Community Names Configuration screen. Using a password with
read-only or read-write access does not allow the user to view or edit the
SNMP Community Names Configuration screen.
To establish community names, proceed as follows:
1. Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
2. Enter the password in the field (maximum 31 characters).
3. Press ENTER.
4. Repeat steps 1 through 3 to modify the other community names.
5. Use the arrow keys to highlight SAVE at the bottom of the screen and
press ENTER. The message “SAVED OK” displays. The community
names are saved to memory and their access modes implemented.
Any community name assigned in the SNMP Community
Names Configuration screen is a password to its
corresponding level of access to Local/Remote Management.
The community name assigned Super-User access is the only
one that gives the user complete access to Local/Remote
Management.
Exiting without saving causes a “NOT SAVED?” message to
display. Edits will be lost if they are not saved before exiting.