Digital Equipment DLE49-MA, Руководство пользователя, Страница: 147 / 216

Ethernet Port Configuration Screen
DLE49-MA User’s Guide 6-41
To change the settings for full duplex flow control, refer to Section 6.12.1 .
Half Duplex Flow Control (Toggle)
Half duplex flow control is enabled when the port is set On, and disabled
when the port is set Off. To change the settings, refer to
Section 6.12.1 .
6.12.1 Selecting Settings
All selectable or toggle fields other than Advertised Ability can be
changed by following this procedure:
1. Use the arrow keys to highlight the field to be changed.
2. Use the SPACE bar or BACKSPACE key to step or toggle through the
selections.
3. Press the ENTER key when the desired selection is displayed.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Your choice will be saved for that interface.
6.12.2 Setting the Advertised Ability
During normal operation, all front panel ports auto-negotiate to the
highest speed possible. Under some circumstances, the Network
Administrator may want the port to advertise only some of the available
modes and not operate in other modes.
To set the advertised ability, proceed as follows:
1. Use the arrow keys to highlight the Advertised Ability field.
2. Use the SPACE bar to select the desired mode.
3. Use the arrow keys to move to the Enabled/Disabled field.
4. Use the SPACE bar to select Enabled or Disabled. Press ENTER.
5. Use the arrow keys to move back to the Advertised Ability selection
and use the SPACE bar to select the next mode to enable or disable.
6. Continue this process until you have completed enabling or disabling
the advertised modes.