Digi IX20, Руководство пользователя

Страница: 61 / 726

Interfaces Wide Area Networks (WANs)
IX20 User Guide 61
3. Click Network > Interfaces .
4. Create a new interface or select an existing one:
n
To create a new interface, see Configure a LAN , Configure a Wide Area Network (WAN) ,
or Configure a Wireless Wide Area Network (WWAN) .
n
To edit an existing interface, click to expand the appropriate interface.
5. After creating or selecting the interface, click IPv4 (or IPv6 ) > SureLink .
6. Enable SureLink.
SureLink can be enabled for both IPv4 and IPv6 configurations. By default, SureLink is enabled
for IPv4 for the preconfigured WAN (
ETH1 ) and WWAN ( Modem ). It is disabled for IPv6.
7. Enable Reboot device .
Note If both the Restart interface and Reboot device parameters are enabled, the Reboot
device parameter takes precedence.
8. Click to expand Test targets .
9. For Add Test Target , click

.
10. Select the Test type :
n
Ping test : Tests connectivity by sending an ICMP echo request to the hostname or IP
address specified in Ping host . You can also optionally change the number of bytes in
the Ping payload size .
n
DNS test : Tests connectivity by sending a DNS query to the specified DNS server .
n
HTTP test : Tests connectivity by sending an HTTP or HTTPS GET request to the URL
specified in Web servers . The URL should take the format of http[s]:// hostname /
[ path ] .