Digi IX20, Руководство пользователя

Страница: 200 / 726

Wi-Fi Configure a Wi-Fi client and add client networks
IX20 User Guide 200
f. Click to expand Scan frequencies list .
The IX20 device has three preconfigured channels that will be scanned for available access
points:
n
Channel 1 (2412 MHz)
n
Channel 6 (2437 MHz)
n
Channel 11 (2462 MHz)
You can delete the preconfigured channels and add additional channels. At least one
channel is required.
g. To delete a preconfigured channel, click the menu icon ( ... ) next to the channel and select
Delete .
h. To add a channel, click Add Scan frequency and select the appropriate channel.
8. Click Apply to save the configuration and apply the change.

Command line
1. Log into the IX20 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Create a new Wi-Fi client:
(config)> add network wifi client new_client
(config network wifi client new_client)>
New access points are enabled by default.