Digi IX20, Руководство пользователя

Страница: 326 / 726

Virtual Private Networks (VPN) OpenVPN
IX20 User Guide 326
(config network interface my_wwan ipv4 connection_monitor
target 0)> interface_timeout 600s
(config network interface my_wwan ipv4 connection_monitor
target 0)>
The default is 60 seconds.
12. Save the configuration and apply the change:
(config openvpn client openvpn_client1 connection_monitor target 0)> save
Configuration saved.
>
13. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show OpenVPN server status and statistics
You can view status and statistics for OpenVPN servers from either the web interface or the
command line:

WebUI
1. Log into the IX20 WebUI as a user with Admin access.
2. On the menu, select Status > OpenVPN > Servers .
The OpenVPN Servers page appears.
3. To view configuration details about an OpenVPN server, click the

(configuration) icon in the
upper right of the OpenVPN server's status pane.

Command line
1. Log into the IX20 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN servers, type the following at the prompt:
> show openvpn server all
Server Enable Type Zone Address Port
--------------- ------ ---- -------- --------------- ----
OpenVPN_server1 true tun internal 192.168.30.1/24 1194
OpenVPN_server2 false tun internal 192.168.40.1/24 1194
>
3. To display details about a specific server:
> show openvpn server name OpenVPN_server1