Digi IX20 Скачать руководство пользователя страница 514

Страница: 514 / 726

User authentication

Remote Authentication Dial-In User Service (RADIUS)

IX20 User Guide

514

8. Add RADIUS to the authentication methods:

a. Click

Authentication

Methods

b. For

Add method

, click



c. Select

RADIUS

for the new method from the

Method

drop-down.

Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned. See

Rearrange the position of authentication methods

for

information about rearranging the position of the methods in the list.

9. Click

Apply

to save the configuration and apply the change.



Command line

1. Log into the IX20 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

2. At the command line, type

config

to enter configuration mode:

> config
(config)>

3. (Optional) Prevent other authentication methods from being used if RADIUS authentication

fails. Other authentication methods will only be used if the RADIUS server is unavailable.

(config)> auth authoritative true
(config)>

4. (Optional) Enable debug messages from the RADIUS client:

(config)> auth radius debug true
(config)>

5. (Optional) Configure the NAS ID. This is a unique identifier for this network access server (NAS).

You can use the fully-qualified domain name of the NAS or any arbitrary string. If not set, the
default value is used:

Содержание IX20























































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IX20

Отзывы:

Бренды по названию

Популярные бренды

Digi IX20, Руководство пользователя

Результаты поиска

Содержание IX20

Отзывы:

Бренды по названию

Популярные бренды