Digi IX20, Руководство пользователя

Страница: 162 / 726

Serial port Show serial status and statistics
IX20 User Guide 162
Where value is a firewall zone defined on your device, or the any keyword.
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config)> ... firewall zone ?
Zones: A list of groups of network interfaces that can
be referred to by packet
filtering rules and access control lists.
Additional Configuration
------------------------------------------------------
-------------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config)>
Repeat this step to list additional firewall zones.
d. (Optional) Enable mDNS . mDNS is a protocol that resolves host names in small networks
that do not have a DNS server.
(config)> serial port1 service ssh mdns enable true
(config)>
11. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
12. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show serial status and statistics
To show the status and statistics for the serial port:

WebUI
1. Log into the IX20 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections , click Serial .

Command line