C/40
Getting to Know and Using the Vehicle
Mod. Agri Farmer
-
ATTENTION
:
- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
(fig.56/C)
1
3
(fig.57/C)
1
2
ANTI-TIppING DEVICE
The device detects the longitudinal stability conditions of the
vehicle, measuring the residual load weighing on the rear axis.
The device is made of:
- Longitudinal moment indicator.
- Alarm re-entry button.
- Override selector.
The device is always working.
The device is not intended for warning of the risk of overturning
in case of:
- A sudden overload;
- When transporting/moving with loads lifted;
- Operation on rough grounds, with obstacles or holes.
- When moving on a gradient or near a slope;
- High speed on a straight road or a curve.
If the system malfunctions, the device blocks all telescopic
boom movements. Display “1” (fig.56/C) will show the error
code, general alarm light “2” (fig.56/C) will permanently switch-
on (see “Central Dashboard - Indicator Lights” paragraph) and
the buzzer will sound continuously. The error code will flash.
In these conditions the operator can return to clock display by
pressing left key “3” (fig.56/C). Once pressed, the panel will
stop sounding but the general alarm light will remain on for as
long as the error remains active By pressing the left key again,
the error will be displayed again, if still active. To identify the
anomaly search for the corresponding error code in the “Anti-
tipping device errors” paragraph.
With the device blocked it is possible to bring the load to safe
conditions by using the override selector “1” (fig.57/C)
for use
specifications, refer to paragraph “Override selector”.
- attEntion -
With the device blocked, the override selector can only be
used to bring the load and the vehicle to safe conditions.
The operation can only be performed by qualified
personnel that has been authorised by the Safety manager.
By pressing and holding button “
“3”
(fig.56/C),the instrument
performs a functioning test, repositioning itself on the
indication of the current state of the load.
Perform the test every 50h of vehicle use.
- attEntion
The test must be performed with vehicle at a standstill,
unloaded, on flat horizontal ground, parking brake en
-
gaged, boom closed and lowered.
A load test to verify efficiency of the device must be
carried out every 100 working hours, during routine
maintenance. This test can only be carried out by an au-
thorised
diEci
workshop.
Содержание Agri Farmer
