Dieci Agri Farmer, Руководство по эксплуатации

Страница: 34 / 272

B/14
Mod. Agri Farmer
Safety Regulations
LOAD HANDLING
- ATTENTION -
Always adhere to safety regulations; always transport ba-
lanced, properly arranged loads to prevent overturning.
- Always fully insert forks under loads and bring them to
the transport position (forks at 300 mm from the ground
and slanted backwards, boom completely retracted).
- Never lift a load harnessed with a single fork or table.
- Always check that the pallets, boxes, etc. are in good
condition and suitable for the type of load to be lifted.
- Manoeuvre the mean with the boom raised only in ex-
ceptional circumstances. In these circumstances, ope-
rate with due prudence, reduce speed as much as pos-
sible and brake delicately. Make sure that visibility is
always sufficient. If necessary, ask an operator on the
ground to guide operations.
- During handling operations, reduce speed as much as
possible and brake delicately.
- Do not manoeuvre loads while the vehicle is moving.
- ATTENTION -
Load handling can be carried out only in reduced
gears “1” and "II" (first and second gear).
- Before turning, slow down as much as possible, and mo-
nitor the load.
- Handle loads with care, at low speed and without sud-
den or skipping movements, above all if carrying at great
heights.
- Do not change direction sharply or at a high speed.
- ATTENTION -
IN THE EVENT OF VEHICLE OVERTURNING, DO NOT
ATTEMPT TO EXIT FROM THE TELEHANDLER DURING
AN ACCIDENT. ALWAYS FASTEN SEAT-BELTS WHEN
DRIVING THE VEHICLE. ALWAYS KEEP SEAT-BELTS
FASTENED WHENEVER INSIDE THE CAB.
- Always use the parking brake when setting down or lif-
ting a load on a slope.
- Always ensure good visibility in the work area, including
direct vision and visibility using rear view mirrors in order
to check for the presence of people, animals, obstacles,
holes and changes in slope etc. animals, obstacles, ani-
mals, obstacles, holes, slope variations
- If visibility on the right side is limited during boom ope-
ration, before lifting the load, ensure that the work area
is clear and make note of the position of any possible
obstacles and irregularities in the terrain.
- Always ensure good visibility (clean windows, clean and
properly working headlights etc.)
- ATTENTION -
The standard illumination of the telescopic loader is not
suitable in working conditions with poor visibility or for
use at night. There are several ways to improve visibi-
lity in poor lighting conditions.
Contact your local
DIECI
dealer.
- Lifting or transporting a load that exceeds the nominal
capacity or the vehicle or accessory IS PROHIBITED .
- ATTENTION -
BEFORE LIFTING LOADS, OPERATORS MUST BE FAMI-
LIAR WITH THE WEIGHT OF THE LOAD AND ITS CEN-
TRE OF GRAVITY.
- Load tables are valid for centres of gravity that are 500
mm from the heels of the forks. Contact your dealer for in-
formation regarding centres of gravity at greater distances.
- Pay CAREFUL ATTENTION during the transport of
loads with a variable centre of gravity (e.g. liquids). Ope-
rate with caution in order to limit such variations and to
prevent the risk of vehicle overturning.
- Pay ATTENTION regarding the risk of limbs being cru-
shed during manual fork adjustment operations.