Dieci Agri Farmer, Руководство по эксплуатации

Страница: 195 / 272

D/31
- ATTENTION
:
- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
During filter cartridge replacement, the primary suction ducts
(fig.56/D Pos.”3”) must be cleaned in addition to the filter
holding plate.
Follow the operations listed below:
1. Remove bolts from the primary suction tube duct
(fig.62/D Pos.”1”).
2. Remove the duct and clean it with a jet of compressed air.
3. Remove the front filter bolt (fig.61/D Pos.”1”) and remove
the air input inlet (fig.61/D Pos.”2”).
4. Use a wet cloth that will not leave residue. Clean every
air input inlet.
5. Repeat the same steps in the opposite order to remount
all components.
- attEntion
In the event that connecting gaskets between the suction
duct and filter should become worn, replace them.
- attEntion
Do not operate with an improperly assembled or damaged filter.
- attEntion
For the complete efficiency of the filter, it is advised to ope -
rate with the filter complete with all parts and components.
All worn parts should be replaced as quickly as possible.
- pRohiBition -
Operating the vehicle without the engine air filter
IS STRICTly pROhIbITED.
The engine suctions in air continuously during use.
Dust that enters into circulation can cause serious
system damage.
- attEntion -
IT IS MANDATORy TO uSE ThE I.p.D. to carry out the
maintenance/control operations.
2
1
(fig.61/D)
(fig.62/D)
(fig.63/D)
1
C1