Dieci Agri Farmer, Руководство по эксплуатации

Страница: 199 / 272

D/35
- ATTENTION
:
- Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
(fig.76/D)
(Swivel plate cylinder block valve)
(fig.75/D)
(Boom internal extension cylinder block valve)
C) fork swivel cylinder : (fig.76/D)
1. Start the engine, pick-up a load on the forks (e.g. a load
of bricks or bales of hay).
Tilt the forks completely backwards.
2. Engage the parking brake and put the transmission in
neutral.
3. Lift the boom off the ground just enough necessary to
allow the forward inclination of the forks.
4. When the engine is running at 1400 RPMs, engage the
control lever to tilt the forks forward. During the fork move-
ment stop the engine. Movement of the swivel must slow
down and then stop as the engine slows down and stops.
If the forks continue to lower or move after the engine is
switched off, the block valve is faulty.
Repair the defect as quickly as possible, contact a
diEci
service centre.
b) boom extension cylinder : (fig.75/D)
1. Start up the engine. Make sure that the parking brake is
engaged and the transmission in neutral.
2. Raise the boom and extend it completely.
3. When the engine is running at 1400 RPMs, engage the
control lever to retract the boom. During boom move-
ment stop the engine. The boom must slow down and
stop as the engine slows down and stops.
If the boom continues to move even after the engine is
switched off, the block valve is faulty. Repair the defect as
quickly as possible, contact a diEci service centre.