Diamond Products CC7574DKV, Руководство оператора

Страница: 32 / 72

CC7574DKV OPERATOR’S MANUAL
Installing the Blade Guard
Always install the blade guard with the blade off
the saw.
1. Holding the blade guard handle, face the
front of the blade guard forward and fit the
tapered mount on the side of the guard onto
the tapered mount on the frame.
Frame Base Mount
2. Insert the lock pin through the hole on the
tapered frame mount to secure the guard.
3. For guards 36” and up, raise the saw
slightly. Place a lock washer and then a flat
washer onto the blade guard screw. Fit the
screw through the slot near the back of the
guard and through the hole on the frame
base, and secure the guard to the frame
using the provided wrench.
4. Connect the water supply hose to the blade
guard.
Removing the Blade Guard
Always remove the blade guard with the blade
off the saw.
1. Disconnect the water supply hose from the
blade guard.
2. For guards 36” and up, raise the saw
slightly. Remove the screw from the frame
base and blade guard.
3. Remove the lock pin from the tapered
frame mount.
4. Use the handle on the blade guard to rock
the guard back and forth while lifting the
guard off the tapered frame mount.
Flange Guard
Install the flange guard over the blade flange
that is not in use.
Installing the Flange Guard
1. Fit the tapered mount on the back of the
flange guard onto the tapered mount on
the frame.
2. Insert the lock pin through the hole on the
tapered frame mount to secure the guard.
Flange Guard Installed
Removing the Flange Guard
1. Remove the lock pin from the tapered
frame mount.
2. Remove the flange guard from the tapered
frame mount.
Diamond Blades
WARNING
• DO NOT exceed the blade’s maximum
recommended speed when cutting.
Excessive blade speeds can cause
blades breakage, resulting in serious
injury or death.
• DO NOT use damaged blades when
cutting to avoid harming yourself, others,
or the saw.
Using the proper blade (size and type)
preserves the blade and improves efficiency,
resulting in lower costs. Refer to the
Association of Equipment Manufacturers
(AEM) safety brochure for diamond blades and
www.diamondproducts.com for additional
blade information.
32