44
2. Installation and Setup
2. Connecting to the Computer
Step 1 : Installing the Software
System Requirements
Operating system (OS)
Windows 7/8.1/10 (32-bit and 64-bit versions)
CPU
Minimum required CPU for the operating system
Memory
Minimum amount of RAM required for the operating system
Optical drive
CD-ROM drive
Video card and monitor
A monitor with at least 256 colors and a resolution of 1024 ×
768 or more is recommended.
• This software is a 32-bit application and therefore runs in WOW64 (Windows-On-Windows 64) when running
on 64-bit versions of Windows operating systems.
• This software has not been tested when running in the Windows XP mode in Windows 7.
For the latest information, see the DGSHAPE Corporation website (http://www.dgshape.com/).
Installable Software
VPanel for DWX
This is the machine control software designed for the DWX series
made by DGSHAPE Corporation.
*
* Some models are not supported. For details on the supported
models, contact your authorized Roland DG Corporation dealer.
Dental Driver
(Windows driver)
This is a Windows-based driver required for sending data from a
computer to the machine.
Setup Guide
(electronic-format
manual)
This is the PDF of this document. The contents are the same.
User’s Manual
(electronic-format
manual)
This manual explains how to operate the software, how to perform
milling using this machine, and how to perform maintenance.
