20
This machine is a precision device. To ensure the full performance of this machine, be sure to observe the
following important points. Failure to observe these points may not only result in loss of performance but
may also cause malfunction or breakdown.
This machine is a precision device.
• Handle this machine carefully and never subject it to impacts or excessive force.
• Carefully clean away milling waste.
• Use this machine within the range of its specifications.
• Never attempt to move the spindle unit or rotary axis by hand with undue force.
• Never needlessly touch anywhere inside the machine except for locations specified in this manual.
Install this machine in a suitable location.
• Install this machine in a location that meets the specified conditions for temperature, humidity, and the like.
• Install this machine in a quiet, stable location offering good operating conditions.
• Never install this machine outside.
• Never install this machine in an environment where silicone substances (oil, grease, spray, etc.) are present.
Doing so may cause poor switch contact.
Leave the machine and the compressor on at all times.
• Turning the machine off leads to moisture collecting inside of the machine, which may lead to malfunction.
• If the compressor is turned off, the supply of air to the machine’s spindle unit will be stopped, which may
lead to malfunction.
This machine becomes hot.
• Never cover the ventilation holes with cloth, tape, or anything else.
• Install this machine in a well-ventilated location.
This machine is a dedicated cutting machine for glass ceramics and composite resins.
• Never cut any material other than glass ceramics and composite resins.
Important Notes on Handling and Use
