22
1. Getting Started
Features of This Machine
This machine is a dental cutting and milling machine that uses glass ceramics and composite resins to make
dental prostheses, including crowns, bridges, inlays, onlays, and veneers.
Installing and setting up the exclusive software on your computer and connecting your computer to this machine
enables you to create high-quality dental prostheses.
For the latest information regarding this machine (including manuals), see the DGSHAPE Corporation website
(http://www.dgshape.com).
Documentation Included with the Machine
The following documentation is included with the machine.
• DWX-42W Setup Guide (this document)
This manual describes how to install the machine and provides information on such matters as how to install
the included software. Be sure to read this first.
* You can find the PDF of the manual on the included DGSHAPE Software Package CD. The contents of the
printed document and the PDF are the same.
• DWX-42W User’s Manual (electronic-format manual)
This manual explains how to operate the software and how to perform milling using this machine. The man-
ual is in electronic format, and no printed document is included. You can find the manual on the included
DGSHAPE Software Package CD.
"
P. 61 “Step 1 : Filling the Coolant Tank”
• Daily Maintenance Card (“Before/After Daily Operations”)
This document provides an overview of the operations that must be performed before and after daily oper-
ations. Be sure to perform the operations on this card before starting and after finishing machine operations
each day.
About This Machine
