29
1. Getting Started
Items to Prepare Yourself
• Water (soft or purified water)
• Source of compressed air (compressor)
• Air hose
• Fluid receptacle
• Additive (ZAW-1000D)
• Chelating reagent (ZCH-100D)
Explanations of each item are given below.
Water (Soft or Purified Water)
This is required in order to make the coolant. Use soft or purified water. Using hard water may have a negative
effect on the service life of the milling bur and on the quality of the product.
Source of Compressed Air (Compressor)
This machine requires compressed air. You will need to prepare a compressor separately.
WARNING
The pressure of the compressed air must be 1.0 MPa or less.
Anything higher may result in a serious accident such as a rupture.
WARNING
Ensure that the supplied compressed air is not contaminated by water, oil,
chemicals, or foreign objects.
The components may deteriorate or rupture, or the contaminants may be
scattered, posing a hazard.
WARNING
Do not supply the compressed air until the air hose is connected securely.
Failure to do so may cause an accident.
The compressor must meet the following conditions.
• Control pressure: 0.3 MPa or more
• Air capacity: 39 L/min or more
• Oil-free type
• Dryer-equipped
Items to Prepare Yourself
