Develop ineo 3320 Скачать руководство пользователя страница 8

Страница: 8 / 295

User's Guide

- 8 -

Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—TIPPING HAZARD:

Floor-mounted configurations require additional furniture for

stability. You must use either a printer stand or printer base if you are using a high-capacity tray and an

input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans,

copies, and faxes, you may need additional furniture.

CAUTION—SHOCK HAZARD:

If you are accessing the controller board or installing optional

hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug

the power cord from the electrical outlet before continuing. If you have any other devices attached to the

printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two

or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY:

Before moving the printer, follow these guidelines to avoid

personal injury or printer damage:

•

Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer before moving it.

•

If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the

latch on the right side of the tray toward the front of the tray until it

clicks

into place.

•

Use the handholds located on both sides of the printer to lift it.

•

Make sure your fingers are not under the printer when you set it down.

•

Before setting up the printer, make sure there is adequate clearance around it.

SAVE THESE INSTRUCTIONS.

Содержание ineo 3320








































































































































































































































































































Результаты поиска

Содержание ineo 3320

Отзывы:

Похожие инструкции для ineo 3320

Бренды по названию

Популярные бренды

Develop ineo 3320, Руководство пользователя

Результаты поиска

Содержание ineo 3320

Отзывы:

Похожие инструкции для ineo 3320

Бренды по названию

Популярные бренды