Develop ineo 3320 Скачать руководство пользователя страница 223

Страница: 223 / 295

User's Guide

- 223 -

Standard network software error [54]

Try one or more of the following:

•

From the printer control panel, select

Continue

to continue printing. For non-touch-screen printer

models, press

to confirm.

•

Turn off the printer and then turn it back on.

•

Update the network firmware in the printer or print server. For more information, contact technical

support.

Standard USB port disabled [56]

From the printer control panel, select

Continue

to clear the message. For non-touch-screen printer

models, press

to confirm.

Notes:

•

The printer discards any data received through the USB port.

•

Make sure the USB Buffer menu is not set to Disabled.

Supply needed to complete job

Do either of the following:

•

Install the missing supply to complete the job.

•

Cancel the current job.

Too many flash options installed [58]

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet.

3. Remove the extra flash memory.

4. Connect the power cord to a properly grounded electrical outlet.

5. Turn the printer back on.

Too many trays attached [58]

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet.

3. Remove the extra trays.

4. Connect the power cord to a properly grounded electrical outlet.

Содержание ineo 3320








































































































































































































































































































Результаты поиска

Содержание ineo 3320

Отзывы:

Похожие инструкции для ineo 3320

Бренды по названию

Популярные бренды

Develop ineo 3320, Руководство пользователя

Результаты поиска

Содержание ineo 3320

Отзывы:

Похожие инструкции для ineo 3320

Бренды по названию

Популярные бренды