Develop ineo 3320 Скачать руководство пользователя

Страница: 211 / 295

User's Guide

- 211 -

Close front door

Close the front door of the printer.

Complex page, some data may not have printed [39]

Try one or more of the following:

•

From the printer control panel, select

Continue

to ignore the message and continue printing. For non-

touch-screen printer models, press

to confirm.

•

Cancel the current print job. For non-touch-screen printer models, press

to confirm.

•

Install additional printer memory.

Defective flash detected [51]

Try one or more of the following:

•

Replace the defective flash memory card.

•

From the printer control panel, select

Continue

to ignore the message and continue printing. For non-

touch-screen printer models, press

to confirm.

•

Cancel the current print job.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Fax memory full

From the printer control panel, touch

Continue

to clear the message.

Fax partition inoperative. Contact system administrator.

Try either of the following:

•

From the printer control panel, select

Continue

to clear the message. For non-touch-screen printer

models, press

to confirm.

•

Turn the printer off, and then turn it back on. If the message appears again, then contact your system

support person or see the “Setting up the printer to fax” section of the

User’s Guide

Содержание ineo 3320








































































































































































































































































































Результаты поиска

Содержание ineo 3320

Отзывы:

Похожие инструкции для ineo 3320

Бренды по названию

Популярные бренды

Develop ineo 3320, Руководство пользователя

Результаты поиска

Содержание ineo 3320

Отзывы:

Похожие инструкции для ineo 3320

Бренды по названию

Популярные бренды