Desoutter CVIL II, Руководство оператора, Страница: 43 / 80

01/2018 43 / 80
6159933780
Issue no: 09
CVIL II
7.8.10 - TOOLSNET menu
The ToolsNet software can be used to recover the
tightening results and the curves on PC via Ethernet.
This screen is the configuration of the ToolsNet data
collector.
Parameter Comment
System type Type of system for ToolsNet server
(3 is the default: OP Undefined
controller).
System
number
Identification of the system in the
controller network (group of stations).
Station
number
Identification of the station in the
controller network (individual station).
FIFO blocking When the result memory to be
transmitted is full, the start cycle that
follows can be locked or not (the start
cycle is not locked on, but next results
are not saved).
Alarm thresh. When the memory filling rate reaches
this value (1 to 99%), an alarm is
displayed.
Date synchro Check the box to synchronize the
controller date with the ToolsNet
server.
FIFO capacity Memory space allocated for not
transmitted results
FIFO used Memory space used in the FIFO
Connection
stat.
NOK: not connected to the CVINET
server.
OK: connection established.