Desoutter CVIL II, Руководство оператора, Страница: 15 / 80

01/2018 15 / 80
6159933780
Issue no: 09
CVIL II
5 - CONTROL SCREENS
1
2
3
4
02513654
● Press to display an additional message providing
information on the origin of the fault.
● Press or to move from one screen to another.
>>> When CVINET or TOOLSNET FIFO
alarm threshold is reached, this symbol is
blinking at the top of the Control screen.
E09 CVINET FIFO is full.
The cycle can not start because the
Locking on when FIFO is full option is
validated and there is no free memory
space left in the FIFO.
Problem with the Ethernet connection or
configuration may be the cause.
e09
CVINET FIFO is full.
The cycle can start but there is no free
memory space left in the FIFO.
Problem with the Ethernet connection or
configuration may be the cause.
5.1 - Standard screen
2
6
3
1
5
4
Legend
1 Counter
2 Status of the NcyOK counter
3 Tightening results
4 Detailed tightening report
5 Min. torque
6 Max. torque
This screen displays the tightening results of the last run
cycle (3), the detailed tightening report (4) and the status
of the NcyOK counter (2).
5.2 - Tightening report
1
Legend
1 Tightening report
This screen displays the tightening report (1) : OK or
NOK.
5.3 - Inputs / Outputs
2
1
Legend
1 Status of inputs
2 Status of outputs
This screen provides information on the status of inputs
(1) (left-hand column) and outputs (2) (right-hand
column) according to tightening report.
5.4 - Barcode reading
02513654
1
Legend
1 Result of a bar code reading
This screen displays the result of a bar code reading (1).