Desin Instruments HS-7000 Series, Общее руководство по инструкции

Страница: 46 / 108

46
PEAK, VALLEY OR INSTANT HOLD INDICATOR.
This function hold the Peak, Valley or Instant value of any measured or calculated in the HS-
7000 , could be displayed or retransmitted by the analog output. This function can be
programmed to be activated automatically or by external commands or manually.
● Parameterization
The standard option set in factory, to activate the Hold press * key, and to Reset the Hold,
press # key. Can also be activated by the logic inputs DI 1 and DI 2 or by any internal logic
structure programming.
The Display can be programmed to display the actual value and the Hold value at the same
time.
●
Configuration
To program it, the Hold Function Blockshould set after the sigal to hold.
In the Block configuration, the type of Hold action should be selected, Peak value (maximum),
Valley value (minimum), or to hold the actual value (instant) when activating the Hold function.
The Hold command, as well as, the Reset command should be previously assigned to one of
the free keys available on the front keypad or to to one of the logic inputs, for remote operation.
Programming and configuration of these options should be done by LoopWin software (see
Advanced Programming).