PROGRAMMA DI MANUTENZIONE PREVENTIVA
ACCESSORI
7
IT
• Inserire il
fi
ltro nell’apposita sede ed avvitare il dado al corpo
pompa
PULIZIA DEL BRUCIATORE XL9 E
• Svitare la vite (H Fig. 5) che blocca il bruciatore alla camera di
combustione (A Fig. 3);
• Estrarre il bruciatore dalla camera di combustione (vedi Fig. 3);
• Svitare le tre viti (B Fig. 12) che bloccano il canotto del
bruciatore (A Fig. 12);
• Ruotare il canotto in senso orario guardando il bruciatore e
s
fi
larlo dalla sua sede;
• Svitare la vite (C Fig. 12) che blocca il gruppo disco
fi
amma-
elettrodi e s
fi
larli dal portaugello (vedi Fig. 13);
• Pulire il disco
fi
amma (D Fig. 14) e gli elettrodi (E Fig. 14);
• Svitare l’ugello (G Fig. 14) dal portaugello (F Fig. 14). Pulirlo, o
se necessario, sostituirlo;
• Rimontare l’ugello (G Fig. 14) nella sua sede;
•
Rimontare il gruppo disco
fi
amma-elettrodi sistemandone
adeguatamente le distanze secondo l’immagine (Fig. 14) rap-
presentativa.
ACCESSORI
TERMOSTATO AMBIENTE
COLLEGAMENTO DEL TERMOSTATO AMBIENTE
AVVERTENZE: Prima di iniziare l’operazione di collega-
mento del dispositivo di controllo si deve: arrestare la
macchina secondo le indicazioni descritte nel paragrafo
“SPEGNIMENTO GENERATORE”; disinserire l’alimenta-
zione elettrica estraendo la spina dalla presa elettrica ed
attendere che il generatore si raffreddi.
Per collegare il dispositivo di controllo bisogna:
• Togliere il cappuccio (D) dalla presa di attacco (A);
• Svitare la vite (B) e staccare il frutto interno (C).
• Scollegare i due cavi dal morsetto n.2 e collegare il cavo nero
al morsetto n.2 e il cavo bianco al morsetto n.3 con un ponte
che va dal morsetto n.3 al morsetto n.1.
• Inserire il frutto (C) nella spina di attacco (A) ed avvitare la vite (B).
• Inserire la spina (E) del Termostato Ambiente o di un
dispositivo di controllo.
FILTRO PRE-RISCALDO COMBUSTIBILE
RUOTA GIREVOLE CON FRENO
A.
C.
B.
A.
Canotto
B.
Vite
canotto
C.
Vite
gruppo di-
sco
fi
amma
Figura 12 - Smontaggio canotto-bruciatore.
C.
C .
D .
4 m m
4 m m
6-
7mm
E.
F.
G .
22 m m
Figura 13 - Smontaggio gruppo disco fi amma-elettrodi.
C.
Vite
gruppo di-
sco
fi
amma
Figura 14 - Distanze elettrodi ugello XL9 E.
C.
Vite,
D.
Disco
fi
amma,
E.
Elettrodi,
F.
Portaugello,
G.
Ugello.
D.
C.
A.
B.
E.