Deprag AST40-1 Скачать руководство пользователя страница 58

Страница: 58 / 153

Operation Using the Integrated Touch Display

9.1 Control

elements

9.1.1 Buttons

The touch display has different operating areas:
Display fields

Display fields can be recognized by the pointed corners. They
only have a display function.

Input fields

Input fields can be recognized by the rounded corners.

Buttons

Keys are buttons that can be used to access and control the
menu, for example.

Switches

Switches are used, for example, in the interface tests to switch the
outputs on and off.

The keys for the menu as well as the open modules are always located along the lower
edge of the display (also see

9.2 Description of the menu structure

9.1.2 Selecting

between two options

If only two options are available for selection, e.g. active or inactive, then the selected
option is displayed in a key. To switch to another option, tap on the key.

Figure 28:

Selecting between two options

Содержание AST40-1


























































































































































Результаты поиска

Содержание AST40-1

Отзывы:

Бренды по названию

Популярные бренды

Deprag AST40-1, Руководство по эксплуатации

Результаты поиска

Содержание AST40-1

Отзывы:

Бренды по названию

Популярные бренды