AN102YY – AN105YY - UI
UPDATE : 22/08/2017
16/84
DELTA PLUS GROUP
B.P. 140 - ZAC de La Peyrolière
84405 APT CEDEX - FRANCE
www.deltaplus.eu
2 / in the following cases :
- Before and during use
- If in doubt
- In the case of contact with chemicals, solvents or fuels that could affect operation
- If it has been subjected to stress during a previous fall
- At least every twelve months by the manufacturer or a competent organization, mandated by them.
PERIODIC REVIEW of PPE :
An examination should be performed at least every twelve months by the manufacturer or a competent organization, mandated by them.
This very important check is related to the maintenance and efficacy of the PPE and hence the user's safety. A written document
authorising reuse should be obtained during this audit in order to reuse the PPE. This document will clarify that the user's safety is linked
to maintaining the efficiency and resistance of the equipment.
Repair or replace the PPE if necessary.
In accordance with European regulations, the identification form must be completed prior to the first use of the product and then updated
and kept with the product as well as the manual by the user.
The legibility of the product labelling should be checked periodically.
FALL INDICATOR :
When the fall indicator is activated, the red colour appears: do not use the fall arrest device. Have the fall
arrest device inspected and checked the by the manufacturer or a competent organization, mandated by
them. The fall indicator swivel should be replaced.
Follow the instructions described in their own technical specifications.
WARNING :
The user's safety depends on the continuing efficacy of the PPE, its strength and the proper understanding of
the instructions in this manual.
Any static or dynamic overload may damage the PPE.
WARNING :
The weight of the user, including his clothing and equipment must not exceed the maximum weight indicated on the fall arrest.
Do not use the self retracting fall arrest device as a restraint or work support device.
Never remove the thermoplastic film surrounding the shock absorber.
In the case of contact with chemicals, solvents or fuels that could affect the operation, take the fall arrest device out of service. Have it
inspected and revised before use.
WARNING :
Do not use a fall arrest equipment which stopped a fall.
It is dangerous to create your own fall arrest system as each safety function may interfere with another safety function.
No modification or addition or repair of the PPE may be made without prior written consent from the manufacturer nor without using their
procedures.
Do not use beyond the scope of use defined in the usage instructions, nor beyond its limits.
The manufacturer cannot be held liable for any direct or indirect accident after a modification or use other than that provided in this
manual.
This equipment should be used in work environments with minimum temperatures of -20°C / maximum of +50°C. (See reference table).
FEATURE OUTSIDE OF STANDARD :
This PPE has been tested with a mass constraint 50% higher than the standard requirements (at 150 kg).
STORAGE INSTRUCTIONS :
During transport and storage :
- Keep the product in its packaging
- Keep the product away from any sharp, abrasive, objects etc...
- Keep the product away from sunlight, heat, flames, hot metal, oil, petroleum products, harsh chemicals, acids, dyes, solvents, sharp
edges and structures of small diameter. These items can affect the performance of the fall arrest device.
After use, store the product in its packaging in a cool, dry, ventilated area.
INSTRUCTIONS FOR CLEANING / MAINTENANCE :
Clean with soap and water, wipe with a cloth and hang in a ventilated area to dry naturally away from any direct fire or source of heat,
even for items that got wet during use.
Do not use bleach, harsh detergents, solvents, gasoline or colouring, these substances can affect the performance of the fall arrest
device.
Clean the strap with a soft detergent only.
MARKING :
- Manufacturer identification : DELTAPLUS®
- Date (month / year) of manufacture, e.g. 10/2014
- The product reference AN (See reference table).
- The batch number, e.g. 14.9999
- The indication of compliance with Directive 89/686/EEC (CE
symbol)
- The number of the notified body involved in the regulation
of equipment (0082 or )
- The number of the standard to which the product is compliant
and its year: EN…
- 150kg : maximum nominal load
As well as the pictograms :
②③⑤⑥⑦⑧⑩⑪
Read the instruction manual before use
②
.
PERFORMANCE / COMPLIANCE :
Compliance with the essential requirements of Directive 89/686/EEC, in particular in terms of design, ergonomics and safety. Meets with
requirements and test standards EN363, EN364, EN365, EN360.
Strap : breaking strength >15 kN.
Tested at 150 kg according to EN360, see product marking.
Other components :
Connector : Follow the instructions described in their own manual.
