Delta RTU-CN01, Руководство по эксплуатации

Страница: 15 / 89

RTU-CN01 Operation Manual
3-4
_3
3.6 Function Switch
The function switch is used for setting the baud rate of CANopen network via DR0 ~ DR2 and data
retention via IN0.
DR2 DR1 DR0 Baud Rate
Max. communication
distance
DR 1
DR 0
DR 2
I N 0
OFF OFF OFF 10 Kbps 5000m
OFF OFF ON 20 Kbps 2500m
OFF ON OFF 50 Kbps 1000m
OFF ON ON 125 Kbps 500m
ON OFF OFF 250 Kbps 250m
ON OFF ON 500 Kbps 100m
ON ON OFF 800 Kbps 50m
ON ON ON 1 Mbps 25m
IN0
OFF
When RTU-CN01 is disconnected from the
master, the output values of the special
modules on its right side turn to 0 and all
output points of its digital modules change to
OFF.
ON
When RTU-CN01 is disconnected from the
master, the output values of the special
modules on its right side and all output point
values of its digital modules keep the same
as they are before disconnection.
Note:

Please set up the function switch when the power is switched off. After the setup is completed, re-power
RTU-CN01.

Use the slotted screwdriver to adjust the DIP switch carefully in case the switch is scratched.
3.7 IO Extension Interface
The interface is used for connecting Delta DVP-S series DI/DO extension modules and special modules.