Delphi Display Systems, Inc. RDS-INSFTTCU
Page 37 of 82
Confidential Document:
Do not copy or distribute without written permission from Delphi Display Systems, Inc.
Copyright
2012. [Unpublished Work]. All rights reserved
4.10.7 Remove Car
THIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRY
The Remove Car screen lets you manually synchronize the Fast Track
®
3000 Series Timer. You will rarely
need this option, however, as the Timer normally synchronizes itself.
Start from MENU Screen (See
–
Section 4.10.6
Menu). The field is on [Remove Car From Lane]:
1. Click:
. You are prompted to enter an Access Code.
2. Enter your six-digit Access Code. You are now in the Remove Car screen.
1. Click:
or
or
or
to move to the station you want to adjust.
2. Click:
. The car count is now decreased by one (to the right of the = sign).
4.10.8 Reset Loop
THIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRY
This screen lets you manually reset an internal Fast Track
®
3000 Series Timer Loop Detector that
remained ON. This action should rarely be required. If this happens regularly, call your local service
company to investigate and make necessary repairs.
NOTE:
Reset Loop feature should only be used when an L light is on and there is no car at that particular
detection point. Example: L4 is on, the Timer is running, but no cars are in the drive-thru lane for that
particular detection point. Generally, L1 and L2
– when used for Menu and Greet – cannot be reset from the
Fast Track Timer.
Reset loop is for internal loop detection only.
