Dell XPS 720 Скачать руководство пользователя страница 35

Страница: 35 / 220

Setting Up and Using Your Computer

Click

Custom

, then click

Use the drop-down box to select

Striping

(RAID 0),

Mirroring

(RAID 1),

Stripe Mirroring

(RAID

0+1), or

RAID 5

Click

The

Free Disk Selection

window appears.

NOTE:

Only RAID-enabled hard drives are listed as free disks.

Click to select the drives that will make up the RAID configuration, click

, and then click

again.

NOTE:

Your computer supports a maximum of two drives per RAID 1 array and four per RAID 0 array.

The

Clearing System Data

window appears.

NOTICE:

The

Clear System Data

option deletes all data on the selected drive.

Click

Finish

to create the RAID configuration.

The MediaShield RAID management utility window appears and lists the array along with any other
installed hard drives.

Deleting a RAID Array

NOTE:

While this procedure deletes the RAID 1 volume, it also splits the RAID 1 volume into two non-RAID hard

drives with a partition, and leaves any existing data files intact. Deleting a RAID 0 volume, however, destroys all
data on the volume.

NOTE:

If your computer currently boots to RAID and you delete the RAID volume, your computer will become

unbootable.

Launch NVIDIA MediaShield.

Click to select the array you want to delete.

Click

Delete Array

in the

System Tasks

pane.

The

NVIDIA

Delete Array Wizard

appears.

Click

A confirmation screen appears with the name and size of the array that you have marked for deletion.

Click

Finish

to delete the RAID configuration.

The MediaShield RAID management utility window appears and lists any remaining arrays along with
any other installed hard drives.

Converting From One RAID Configuration to Another RAID Configuration

NOTICE:

In order to use the migrating option to convert a RAID configuration without losing data, your hard drive

must initially be set up as a single drive RAID 0 array before the operating system is loaded onto the drive (see
"Using the NVIDIA MediaShield ROM Utility" on page 33 for instructions).

Содержание XPS 720





























































































































































































































Результаты поиска

Содержание XPS 720

Отзывы:

Похожие инструкции для XPS 720

Бренды по названию

Популярные бренды

Dell XPS 720, Руководство пользователя

Результаты поиска

Содержание XPS 720

Отзывы:

Похожие инструкции для XPS 720

Бренды по названию

Популярные бренды