Dell XPS 720 Скачать руководство пользователя страница 173

Страница: 173 / 220

Appendix

173

Password Changes

(

Unlocked

default)

This option locks the system password field with the administrator (admin)
password.

NOTE:

When the system password field is locked, you can no longer disable

password security by pressing <Ctrl><Enter> when the computer starts.

Execute Disable

(

default)

Enables or disables Execute Disable Memory Protection technology.

•

Off

—

Execute Disable Memory Protection technology

is disabled.

•

—

Execute Disable Memory Protection technology

is enabled.

Power Management

AC Recovery

(

Off

default)

Specifies how the computer will behave when AC power is restored after an
AC power loss.

•

Off

— The system stays off after AC power is restored.

•

— The system powers on after AC power is restored.

•

Last

— The system returns to the previous state after AC power is restored.

Auto Power On

(

Off

default)

Disables or selects when to automatically turn on the computer.

•

Off

— Do not use the

Auto Power Time

•

Everyday

— Turn the computer on every day at the time set in

Auto Power

Time

•

Weekdays

— Turn the computer on Monday through Friday at the time set in

Auto Power Time

NOTE:

This feature does not work if you turn off your computer using a power

strip or surge protector.

Auto Power Time

Specifies the time to automatically turn on the computer.

Change the time to automatically turn on the computer by pressing the up- or
down-arrow key to increase or decrease the numbers, or type the numbers in
the appropriate time field.

NOTE:

This feature does not work if you turn off your computer using a power

strip or surge protector.

Low Power Mode

(

Off

default)

Specifies how aggressive the system is at conserving power while in hibernate
mode or turned off.

•

Off

—

Add more functionality

•

—

Conserve more power.

Suspend Mode

(

default)

Specifies the power management suspend mode.

•

— The computer resumes more quickly from sleep mode.

•

— The computer conserves more power when not in use (system memory

remains active).

Содержание XPS 720





























































































































































































































Результаты поиска

Содержание XPS 720

Отзывы:

Похожие инструкции для XPS 720

Бренды по названию

Популярные бренды

Dell XPS 720, Руководство пользователя

Результаты поиска

Содержание XPS 720

Отзывы:

Похожие инструкции для XPS 720

Бренды по названию

Популярные бренды