manualshive.com logo in svg

Dell Vostro 200, Руководство пользователя, Страница: 74 / 214

Поделиться
Скачать
Dell Vostro 200 Скачать руководство пользователя страница 74

74

Solving Problems

Power Problems

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions in the 

Product Information Guide

.

I

F

 

THE

 

POWER

 

LIGHT

 

IS

 

OFF

—

The computer is either turned off or is not 

receiving power.

• Reseat the power cable into both the power connector on the back of the computer 

and the electrical outlet.

• If the computer is plugged into a power strip, ensure that the power strip is 

plugged into an electrical outlet and that the power strip is turned on. Also bypass 
power protection devices, power strips, and power extension cables to verify that 
the computer turns on properly.

• Ensure that the electrical outlet is working by testing it with another device, such 

as a lamp.

I

F

 

THE

 

POWER

 

LIGHT

 

IS

 

STEADY

 

BLUE

 

AND

 

THE

 

COMPUTER

 

IS

 

NOT

 

RESPONDING

—

See "Power Lights" on page 81.

I

F

 

THE

 

POWER

 

LIGHT

 

IS

 

BLINKING

 

BLUE

—

The computer is in standby mode. 

Press a key on the keyboard, move the mouse, or press the power button to resume 
normal operation.

I

F

 

THE

 

POWER

 

LIGHT

 

IS

 

STEADY

 

AMBER

—

Power problem or internal device 

malfunction.

• Ensure that the 12-volt power connector (12V) is securely connected to the system 

board (see "System Board Components" on page 106).

• Ensure that the main power cable and front panel cable are securely connected to 

the system board (see "System Board Components" on page 106).

I

F

 

THE

 

POWER

 

LIGHT

 

IS

 

BLINKING

 

AMBER

—

The computer is receiving electrical 

power, a device might be malfunctioning or incorrectly installed.

• Remove and then reinstall the memory modules (see "Memory" on page 111).
• Remove and then reinstall any cards (see "Cards" on page 115).
• Remove and then reinstall the graphics card, if applicable (see "Removing a 

PCI/PCI Express Card" on page 121).

book.book  Page 74  Thursday, June 14, 2007  6:23 PM

Содержание Vostro 200























































































































































































































Отзывы:

Нет отзывов