manualshive.com logo in svg

Dell Vostro 200, Руководство пользователя, Страница: 101 / 214

Поделиться
Скачать
Dell Vostro 200 Скачать руководство пользователя страница 101

Removing and Installing Parts

101

Removing and Installing Parts

 

CAUTION: 

Some of the parts described in this chapter may be replaceable by a 

certified service technician only and are not customer replaceable.

Before You Begin

This chapter provides procedures for removing and installing the components 
in your computer. Unless otherwise noted, each procedure assumes that the 
following conditions exist:

•

You have performed the steps in "Turning Off Your Computer" on page 102 
and "Before Working Inside Your Computer" on page 102.

•

You have read the safety information in the Dell™ 

Product Information 

Guide.

•

A component can be replaced or—if purchased separately—installed by 
performing the removal procedure in reverse order.

Recommended Tools

The procedures in this document may require the following tools:

•

Small flat-blade screwdriver

•

Small Phillips screwdriver

•

Small plastic scribe

•

Flash BIOS executable update program on the Dell Support website at 

support.dell.com

book.book  Page 101  Thursday, June 14, 2007  6:23 PM

Содержание Vostro 200























































































































































































































Отзывы:

Нет отзывов