Dell PowerEdge M IO Aggregator, Справочное руководство

Страница: 236 / 264

234 | System Time
www.dell.com | support.dell.com
clock summer-time recurring
Set the software clock to convert to daylight saving time on a specific day each year.
Syntax
clock summer-time time-zone recurring [ start-week start-day start-month start-time end-week
end-day end-month end-time [ offset ]]
To delete a daylight saving time zone configuration, use the no clock summer-time command.
Parameters
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
clock summer-time recurring Sets a date (and time zone) on which to convert the switch to daylight saving
time each year.
show clock Displays the current clock settings.
time-zone
Enter the three-letter name for the time zone. This name is displayed in the show clock
output.
You can enter up to eight characters.
start-week (OPTIONAL) Enter one of the following as the week that daylight saving begins and then
enter values for
start-day
through
end-time
:
•
week-number:
Enter a number from 1-4 as the number of the week in the month to
start daylight saving time.
• first: Enter this keyword to start daylight saving time in the first week of the month.
•
last:
Enter this keyword to start daylight saving time in the last week of the month.
start-day Enter the name of the day that you want daylight saving time to begin. Use English three
letter abbreviations, for example, Sun, Sat, Mon, etc.
Range: Sun – Sat
start-month
Enter the name of one of the 12 months in English.
start-time
Enter the time in hours:minutes. For the hour variable, use the 24-hour format, example,
17:15 is 5:15 pm.
end-week
Enter the one of the following as the week that daylight saving ends:
•
week-number:
enter a number from 1-4 as the number of the week to end daylight
saving time.
• first: enter the keyword first to end daylight saving time in the first week of the
month.
•
last:
enter the keyword last to end daylight saving time in the last week of the month.
end-day Enter the weekday name that you want daylight saving time to end. Enter the weekdays
using the three letter abbreviations, for example Sun, Sat, Mon etc.
Range: Sun to Sat
end-month
Enter the name of one of the 12 months in English.
end-time Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format,
example, 17:15:00 is 5:15 pm.
offset
(OPTIONAL) Enter the number of minutes to add during the summer-time period.
Range: 1 to 1440.
Default: 60 minutes.
Version 8.3.17.0 Supported on M I/O Aggregator