Dell PowerEdge M IO Aggregator, Справочное руководство

Страница: 253 / 264

Debugging and Diagnostics | 251
Example 4 Figure 25-4. show diag testcase stack-unit interactive Command Example
show hardware stack-unit
Displays the data plane or management plane input and output statistics of the designated component
of the designated stack member.
Syntax show hardware stack-unit 0-5 { buffer [buffer unit | port [( 1-56) | all ] total buffer | buffer unit ( 1 ) port
( 1-56 ) queue [( 0-14 ) | a11] buffer-info} { phy-firmware-version } { cpu data-plane statistics
[ stack-port 0-52 ] | cpu party-bus statistics | cpu private-mgmt statistics | drops [ unit 0-1 [ port
1-56 ]] | stack-port 33-56 | unit 0-0 { counters | details | port-stats [ detail ] | register }}
Parameters
FTOS#show diag testcase stack-unit 0 interactive
**************************** Navasota Diagnostics Test
*************************
Test ID Test Description Test Level
------- ---------------- ----------
401 POWERLEDTEST Interactive
402 DEBUGLEDTEST Interactive
403 STATUSLEDTEST Interactive
404 OPTMODLEDCONTROLTEST Interactive
405 FIXEDLEDCONTROLTEST Interactive
406 RTCBATTERYTEST Interactive
407 CPLDRESETTEST Interactive
408 I2CDEVICESCANTEST Interactive
409 SERVERPORTPHYEXTLINKTEST Interactive
410 CPUSNAKEQSFPPEXTLPBKTEST Interactive
411 CPUSNAKEOPTMODEXTLPBKTEST Interactive
Total Diagnostic Testcases in Interactive: 11
************************************* END
**************************************
stack-unit 0-5
{ command-option }
Enter the keyword
stack-unit
followed by 0 to 5 to select a particular stack
member and then enter one of the following command options to display a
collection of data based on the option entered.
buffer
Enter the keyword
buffer
, optionally followed by the keywords
total-buffer
to show the total buffer statistics per stack unit. Enter the
keywords
buffer unit
then
total-buffer
to display the buffer details per unit
and mode of allocation. To display the forwarding plane statistics containing
the packet buffer usage per port per stack unit, enter the keywords
buffer
unit
followed by
port
and the port number (
1-56
or
all)
, then
buffer-info
.
To display the forwarding plane statistics containing the packet buffer
statistics per COS per port, enter the keywords
buffer unit
and
port
(
1-56)
,
and
queue
(
0-14
or
all)
, and
buffer-info
.
Buffer unit default: 1
fpga
Enter the keyword
fpga
, to display fpga details.
fru
Enter the keyword
fru
, to display fru details.
phy-firmware-version Each member of the stack is updated automatically with the latest firmware
while booting as well as during OIR. Enter the keyword
phy-firmware-version
, to dump the physical firmware version for stack
units.